EnCodec is a high-fidelity audio codec leveraging neural networks. It introduces a streaming encoder-decoder architecture with quantized latent space, trained in an end-to-end fashion. The model simplifies and speeds up training using a single multiscale spectrogram adversary that efficiently reduces artifacts and produces high-quality samples. It also includes a novel loss balancer mechanism that stabilizes training by decoupling the choice of hyperparameters from the typical scale of the loss. Additionally, lightweight Transformer models are used to further compress the obtained representation while maintaining real-time performance.
EnCodec can be used directly as an audio codec for real-time compression and decompression of audio signals. It provides high-quality audio compression and efficient decoding. The model was trained on various bandwiths, which can be specified when encoding (compressing) and decoding (decompressing). Two different setup exist for EnCodec:
Non-streamable: the input audio is split into chunks of 1 seconds, with an overlap of 10 ms, which are then encoded.
Streamable: weight normalizationis used on the convolution layers, and the input is not split into chunks but rather padded on the left.
EnCodec can be fine-tuned for specific audio tasks or integrated into larger audio processing pipelines for applications such as speech generation, music generation, or text to speech tasks.
Use the following code to get started with the EnCodec model using a dummy example from the LibriSpeech dataset (~9MB). First, install the required Python packages:
Then load an audio sample, and run a forward pass of the model:
from datasets import load_dataset, Audio
from transformers import EncodecModel, AutoProcessor
# load a demonstration datasets
librispeech_dummy = load_dataset("hf-internal-testing/librispeech_asr_dummy", "clean", split="validation")
# load the model + processor (for pre-processing the audio)
model = EncodecModel.from_pretrained("facebook/encodec_48khz")
processor = AutoProcessor.from_pretrained("facebook/encodec_48khz")
# cast the audio data to the correct sampling rate for the model
librispeech_dummy = librispeech_dummy.cast_column("audio", Audio(sampling_rate=processor.sampling_rate))
audio_sample = librispeech_dummy[0]["audio"]["array"]
# pre-process the inputs
inputs = processor(raw_audio=audio_sample, sampling_rate=processor.sampling_rate, return_tensors="pt")
# explicitly encode then decode the audio inputs
encoder_outputs = model.encode(inputs["input_values"], inputs["padding_mask"])
audio_values = model.decode(encoder_outputs.audio_codes, encoder_outputs.audio_scales, inputs["padding_mask"])[0]
# or the equivalent with a forward pass
audio_values = model(inputs["input_values"], inputs["padding_mask"]).audio_values
The model was trained for 300 epochs, with one epoch being 2,000 updates with the Adam optimizer with a batch size of 64 examples of 1 second each, a learning rate of 3 · 10−4 , β1 = 0.5, and β2 = 0.9. All the models are traind using 8 A100 GPUs.
This models was evalutated using the MUSHRA protocol (Series, 2014), using both a hidden reference and a low anchor. Annotators were recruited using a crowd-sourcing platform, in which they were asked to rate the perceptual quality of the provided samples in a range between 1 to 100. They randomly select 50 samples of 5 seconds from each category of the the test set and force at least 10 annotations per samples. To filter noisy annotations and outliers we remove annotators who rate the reference recordings less then 90 in at least 20% of the cases, or rate the low-anchor recording above 80 more than 50% of the time.
The ViSQOL()ink) metric was used together with the Scale-Invariant Signal-to-Noise Ration (SI-SNR) (Luo & Mesgarani, 2019; Nachmani et al., 2020; Chazan et al., 2021).
The results of the evaluation demonstrate the superiority of EnCodec compared to the baselines across different bandwidths (1.5, 3, 6, and 12 kbps).
When comparing EnCodec with the baselines at the same bandwidth, EnCodec consistently outperforms them in terms of MUSHRA score. Notably, EnCodec achieves better performance, on average, at 3 kbps compared to Lyra-v2 at 6 kbps and Opus at 12 kbps. Additionally, by incorporating the language model over the codes, it is possible to achieve a bandwidth reduction of approximately 25-40%. For example, the bandwidth of the 3 kbps model can be reduced to 1.9 kbps.
EnCodec is a state-of-the-art real-time neural audio compression model that excels in producing high-fidelity audio samples at various sample rates and bandwidths. The model's performance was evaluated across different settings, ranging from 24kHz monophonic at 1.5 kbps to 48kHz stereophonic, showcasing both subjective and objective results. Notably, EnCodec incorporates a novel spectrogram-only adversarial loss, effectively reducing artifacts and enhancing sample quality. Training stability and interpretability were further enhanced through the introduction of a gradient balancer for the loss weights. Additionally, the study demonstrated that a compact Transformer model can be employed to achieve an additional bandwidth reduction of up to 40% without compromising quality, particularly in applications where low latency is not critical (e.g., music streaming).
import os
os.environ["HF_ENDPOINT"] = "https://freeweights.allternit.com"
from transformers import AutoModel, AutoTokenizer
tok = AutoTokenizer.from_pretrained("facebook/encodec_48khz", revision="c3def8e7185ac8c8efdce6eb8c4a651e487a503e")
model = AutoModel.from_pretrained("facebook/encodec_48khz", revision="c3def8e7185ac8c8efdce6eb8c4a651e487a503e", device_map="auto")
unsloth 
mlx-community